< img src="https://mc.yandex.ru/watch/88740311" style="position:absolute; left:-9999px;" alt="" />
Industrial Electrical Cabinet


Home > Capabilities > News Back

Common Problems in Bending Process

Date:2022-08-18 Share:

Sheet metal manufacturers generally have many kinds of processes, and bending process is one of them, which is often used. Problems are inevitable in this processing process. Then I will introduce you how to solve the problems encountered in the bending process.

There are many common problems in the bending process. Here are three common problems in the bending process.

When bending long objects, what if one end is large and the other end is small?

When this happens, it is generally caused by the following reasons:

1) The middle block is unstable and not at the same level;

2) The thickness of the material is different. Generally, one end is thin and the other end is thick;

3) The die is uneven due to wear, resulting in different heights at both ends.

There are three solutions:


1 Change the mold;

2 Adjust the intermediate block to make it balanced;

3 In terms of material selection, feedback to laser or NCT to make the material intact.

2) The bending scale is small, it is difficult to locate, and the upper die is easy to press onto the rear gauge. What should I do?

Generally, the reason for this is that according to the principle of lower mold selection, it is impossible to locate during formal installation. If the lower die is installed reversely, the upper die will press the rear gauge, resulting in the failure of both positive and negative installation. The general solution is to add a gasket in front of the rear setting gauge, so as to make the rear setting gauge retreat and avoid the upper die.

3) What if the workpiece deforms during bending?

Generally, the workpiece is deformed during bending because the bending speed is too fast. Generally, this situation can be solved by reducing the bending speed and making the hand work and work at the same time. Click here to contact JIATONG.

QUICK LINKS>>>Sheet Metal Frame | Sheet Metal Housing | Sheet Metal Chassis | Sheet Metal Cover | Sheet Metal Parts Components | China Sheet Metal Manufacturer | Custom Sheet Metal Parts | Sheet Metal Cabinet | China Sheet Metal Parts | Sheet Metal Bracket | Sheet Metal Parts Manufacturer | Sheet Metal Fabrication China | Metal Manufacturing in China | Metal Enclosure Manufacturers | Sheet Metal Cover | Sheet Metal China | Sheet Metal Enclosure | Electrical Cabinet | Electrical Enclosure Cabinet | Electrical Cabinet Manufacturer | Prototype Sheet Metal Parts | China Sheet Metal Supplier | Sheet Metal Prototype | Sheet Metal Box Fabrication | China Sheet Metal | Electrical Control Cabinet | Small Electrical Cabinet

Tag:Industrial Electrical Cabinet

Other News

Other News



Reply Within 24 Hours

Hotline:+86 0769 81584005 E-mail: jiatong028@dgjiatong.com

Please place file(s) for transfer in the same folder and ZIP or RAR before attaching. Larger attachments can take a few minutes to transfer depending on your local internet speed :) For attachments over 20MB, click  WeTransfer and send to jiatong028@dgjiatong.com.

Once all fields are filled in you will be able to send your message/file :)